Mai pensato di comprare un aereo? Di prendere il brevetto di volo?
Ah…troppo costoso? Esatto…sicuramente è un hobby per ricchi, ma almeno è alla portata di molti comprare un bell’aereo radiocomandato, meglio sicuramente se con motore elettrico e darsi quindi all’aeromodellismo. 🙂
Quelli più piccoli e lenti possono essere fatti volare nei parchi pubblici, nelle zone senza persone che nelle aree verdi più grandi ci sono sempre. Meglio se in giornate con pochissimo vento (meno di 10 km/h)
Quelli più veloci è meglio usarli in aeree dedicate, campi volo ufficiali e relativi aeroclub, o in quegli spazi che per pratica diffusa sono diventati dei campi volo non autorizzati…ma realmente usati ogni week-end da decine di appassionati di volo elettrico o a motore a scoppio.
Per chi ha questi pensieri…iniziamo da alcuni modelli acquistabili subito online, quelli RTF sono Ready To Fly, cioè pronti al volo con al massimo 2 ore di lavoro per il montaggio dei pezzi e la ricarica della batteria, ma le scatole contengono tutto il necessario per volare, come radiocomando, servocomandi, caricabattarie, ecc.:
Cosa sono i canali?
Rappresentano le possibilità di manovra del velivolo: 2 sono il minimo per governarlo…cioè gli stessi che hanno i piccoli aerei giocattolo della Silverlit, quindi acceleratore e la possibilità di virare a destra o a sinistra. Nei giocattoli accade tramite la variazione di potenza dei motori, mentre negli aeromodelli con il timone di coda.
Poi possiamo avere altri alettone governabili sul profilo delle ali e sul profilo delle ali della coda.
Più canali si hanno e più potente è il motore e più possibilità abbiamo di pilotare nel vento o eseguire manovre…però è anche tutto più difficile! 🙂
Quindi l’ideale è cominciare da un aereo a 3 canali e poi aggiungere il quarto canale, se possibile, oppure comprare un aereo a 4 canali.
AeroModelli RTF 3 canali:
- Art-Tech Wind Dragon
- Aerobird 3 (o Challenger)
- Super Cub (il più realistico…sembra un Cesna)
- Firebird Phantom
AeroModelli RTF 4 canali:
Modelli da costruire e accessori:
Radio economiche (minimo 4 canali), con ricevente:
Infine vi lascio con un testo in inglese che, seppure lungo e in lingua non italiana, ha al suo interno praticamente tutto lo scibile relativo alla scelta di un aeromodello per principianti puri (come lo sono io…visto che al momento ho solo un Silverlit x-twin jet!)Getting your first plane? What should you get
If you have an instructor, follow his/her advice as to what to get as your
plane. Getting info here is good, but
discuss it with the instructor before you buy.
If you are going to be helping a new flyer learn to fly,
this thread might be helpful. Here is the method I use to
Helping people Learn to Fly
RTF, ARF or KIT? What does this mean?
An RTF, Ready-To-Fly, typically requires virtually no building. Everything
is built. You attach the wing and perhaps the tail and you are done.
Typical investment of time is 15 minutes to 2 hours. The Aerobird
Challenger is a good example of an RTF plane.
RTFs ALWAYS include an installed radio system an may also
include the battery and charger.
ARF vs kit. How are they different? Depends on your definition.
ARFs and kits always require you to buy and install the electronics.
However some of the makers, such as Mountain Models and GWS,
offer select packages that include the kit and the electronics. You still
have to assemble/build, but all the guess work is taken out of what
electronics to buy. This makes it very easy for the first time builder
to get it right. The radio itself is usually not included in these
Most wood KITS are a box of sticks and sheet parts that are cut from larger
sheets. You glue them together to form the structure then you cover it with
heat shrink film, some other covering, or paint the finished structure.
Build time could run 10-30 hours including gluing, covering and fitting out
with the electronics. The Mountain Models Switchback would be an example.
Wood ARFs are typically kits that are already built and covered into major
structures such as fuselage, wings, tail, etc. Here you are doing final
assembly. The Ascent is a good example.
Typical build time is in the 3-10 hour range. Much less time and
much less skill is required. Then you install the electronics.
All foam kits, in my opinion, are more similar to ARFs than they are to wood
kits. They typically consist of large molded pieces that glue or friction
fit together. Typical is 3-10 hours to complete. The Graupner Tipsey is a
Some foam kits call for covering but the Tipsy, for example, does not.
When required, covering can often be done with tape which can be very easy
for the new builder. So I consider most foam kits to be more ARF than kit.
Multiplex and GWS kits fall into this kit/ARF class and are usually very
complete. As a first step from an RTF, these can be very good choices.
There are many other brands that provide very high quality products. I use
these companies as examples because I often recommend their planes.
How much space do you have for flying? If you have totally
clear space of at least 600’X600′, about 9 square acres, approx
4-6 squarefootball/soccer fields, then I can recommend one
class o plane.
If your space is more like 200X200 (one square acre or one
soccer field ) then a different plane is in order. If it is
ess than that, different again.
These are my own designations and are based on my subjective
ranking of the sace a new flyer should have when learning on
his own. An experienced fyer can fly faster planes in smaller spaces,
but a new flyer wants to have more space so you are not in a constant
state of panic trying to turn. Now, you
can get above the edges of the field and expand your space,
but if you lose control, you drop in woods, on top of kids or smash
someone’s windshield. If that windshield is in a car is traveling
down a road when you hit the windshield, you could cause an
accident or worse.
So much for space. You get the idea.
I don’t recommend most pretty planes as first planes. They
are too easy to break, too hard to fix and look bad in short
order. There is only one semi-scale plane that has a reputation of being
super tough that I do recommend, the HobbyZone Super Cub.
I don’t recommend two channel R/T or differential thrust
planes, the ones with two motors, so you won’t find any on
the list. If you want one of these, I would suggest the Firebird Commander 2
from HobbyZone or the AeroAce from Air Hogs. They can be very
easy to fly and can be a lot of fun, but they can also be very easy to lose. You
should plan to fly them in calm air when you are first starting or the
wind can just carry them away.
I feel a high wing three channel R/E/T plane is your best choice for a first
plane. R/E/T will require a little more learning than the two channel R/E
planes but is a better choice as a first plane, in my opinion. These use
the same control inputs as more advanced planes and can be flown in
more wind once you have mastered them in calm conditions.
Below I list electric planes for beginners. Some come ready to fly, some are
almost ready to fly (add your own radio gear) and some are kits. All of them are
electric. If you are looking for your
first plane, you should find something here to peak your interest.
If you are totally new to RC Flying, this article may be
Six Keys to Success for new e-flyers
READY TO FLY STARTER PLANES – Electric Parkflyers
No building – they practically fly right out of the box. These also
glide well so you can thermal soar with them under the right conditions.
SMALL SPACE FLYER
Can fly in 200X200 or even a large gym
Slow-V from Parkzone – $140 –
I have flown the slo-V.
Best flown in still to 3 mph breeze. This is the best choice for
people who only have a small space to fly or who have an indoor
place to fly, such as a large gym or similar space.
LARGE SPACE – AT LEAST 600×600
That’s about 4 Football/soccer fields
Shown in order or recommendation
Easy Star – RTF – $175
I have flown the Easy Star – Great plane for new flyers!
Super tough foam. Good parkflyer and a good glider
Mods, upgrades and more
Add Ailerons – Start at post 195
HobbyZone Super Cub – $159
This is the only semi-scale plane on my list. I have not
flown this one but the flood of excellent reports leads me
to recommend it to new flyers. If you REALLY need a plane that looks
like something people would be in, this is the one I will
recommend. It takes the same Xport accessories as other
HobbyZone and ParkZone planes so you can drop bombs, parachutes and attach
other accessories to extend your fun. It has a steerable tail
wheel so you can effectively taxi the plane. Great for ROG launches.
Photos and Videos
Other Excellent Video – Hi res for high speed connect users
Discussions on the Forums
T-Hawk – RTF – Excellent Value – $160-170
This company is really putting together some outstanding
packages. I have flown the T-Hawk. Excellent first plane.
Get the Extreme value package. It comes with an extra wing,
tail and battery. This plane stands up to hard landings
Can be flown on 27 MHz or 72 MHz
This is really unique!
T-Hawk Discussion Thread
Aerobird 3 – RTF Electric – $110 –
I started on an Aerobird RTF. I have hundreds of flights on my Aerobirds. I
also thermal and slope soar this plane.
Flies well and stands up to hard landings. Their add on fun accessories for
air to air combat and drop module add to the fun! The combat module makes a
plane locator, even if you don’t plan to fly combat. Great keep in the car
plane – take off the wing and it goes back
in the box fully assembled. Most can’t do that!
Hobbico Sky Fly – $100
I owned one of these. Second best landing gear and ground
handling of the planes I list here. If you have a hard runway, this is
a good choice for ROG and runway landings.
Hobbico suggests only a 500 foot range but mine was good to
at least 1000 feet. 500 feet should be enough for most people.
This is the least aerobatic of the planes listed.
Recommended wing reinforcement by mdp17681
Firebird Phantom – $60
Basically this plane flies like a small Aerobird 3. It has good performance and
handles well in the air. It flies nicely at half throttle and has a good glide.
The radio has a 1300 foot range, which is plenty for this size plane. And it
incorporates ACT, Anti Crash Technology which can help you recover from bad
situations IF you read the manual and understand how it works. I have one and
I like it!
Hobbico Red Hawk $70
This is a very low cost 3 channel plane. It is good for low wind conditions.
It is a good value for the price, especially when compared
to the 2 channel planes seen at this price. It looks very much like the
Aerobird Challenger, listed above, but is not as responsive or aerobatic in
stock form. Select this one on price, not performance. It will get you in the air.